Oxidation Mechanism of Ni—20Cr Foils and Its Relation to the Oxide-Scale Microstructure

The oxidation behavior of Ni—20Cr foils of 100- and 200-m thickness wasstudied in air between 500 and 900°C. Simultaneously, the morphology,microstructure, and composition of the oxide layers were determined byscanning and transmission electron microscopies. Depending on thetemperature, the oxide layer differed significantly. The scale formedat all temperatures was complex, with an outer NiO layer having columnargrains, and an inner layer of equiaxedNiCr₂O₄+NiO+Cr₂O₃ grains. At low temperatures (500 and 600°C),the chromium content was insufficient to form a continuousCr₂O₃ layer, while such a continuous layer formed at theinner interface at oxidation temperatures of 700 to 900°C. At 600°C,internal oxidation of chromium occurred in the substrate. The oxidationmechanism is described taking into account these morphologies and theoxidation kinetics. The observation of no significant differences betweenthe oxidation behavior of thin strips and thick materials is related to thelimited exposure times of the study.     

Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing

Al/Cu metal joints applied for the electrical connector was joined by the friction welding method to limit the formation of intermetallic compound under optimum friction welding condition. To guarantee the reliability of the Al/Cu joints in service requirement, the effects of the intermetallic compound layer on the electrical and mechanical properties have been investigated under various annealing conditions. Two kinds of intermetallic compounds layer were formed in the joints interface and identified by AlCu and Al₂Cu. The growth kinetic of these intermetallics during the annealing can be followed by volume diffusion process. The activation energy of Al₂Cu, AlCu and total intermetallic compound (AlCu + Al₂Cu) represented 107.5, 98.42 and 110.22 kJ/mol, respectively. A thicker intermetallic compound layers could seriously degrade the electrical resistivity and tensile strength. The electrical resistivity with 21 μm thickness of intermetallic compound was 45 μΩ cm and increased to be 85 μΩ cm with 107 μm of intermetallic compound. Tensile strength remarkably decreased from 85 MPa to near zero at the annealing condition of 773 K and 129.6 ks and fracture occurred through the intermetallic compound layers.     

Investigation on gradient material fabrication with electron beam melting based on scanning track control

A new electron beam control system was developed in a general vacuum electron beam machine by assembling with industrial control computer, programmable logic control （PLC）, deflection coil, data acquisition card, power amplifier, etc. In this control system, scanning track and energy distribution of electron beam could be edited off-line, real-time adjusted and controlled on-line. Ti-Mo gradient material （GM） with high temperature resistant was fabricated using the technology of electron beam melting. The melting processes include three steps, such as preheating, melting, and homogenizing. The results show that the GM prepared by melting technology has fine appearance, and it has good integrated interface with the Ti alloy. Mo and Ti elements are gradually distributed in the inter.face of the gradient material. The microstructure close to the Ti alloy base metal is α ＋ β basket-waver grain, and the microstructure close to the GM is a single phase of β solid solution.     

Well-dispersed single-walled carbon nanotube/polyaniline composite films

Single-walled carbon nanotube (SWNT)/polyaniline (PANI) composite films with good uniformity and dispersion were prepared by electrochemical polymerization of aniline containing well-dissolved SWNTs. The results of atomic force microscopy (AFM) and UV-Vis adsorption spectroscopy show that aniline can be used to solubilize SWNTs via formation of donor-acceptor complexes. The electrochemical deposition of SWNT-aniline solutions have been investigated by cyclic voltammetry. The results show that SWNT-based aniline solutions exhibit a drastic increase in peak current within the potential scanning region. The doping effect of SWNTs on PANI films was investigated by electrochemistry and FTIR spectroscopy. The results indicate that the enhanced electroactivity and conductivity of the SWNT/PANI composite films may be due to the strong interaction between SWNTs and PANI, which facilitates the effective degree of electron delocalization.     

Perylene derivative sensitized multi-walled carbon nanotube thin film

Perylene-sensitized multi-walled carbon nanotubes (PV-MWNT) have been prepared by a π-stacking between nanotubes and perylene derivatives, N,N′-diphenyl glyoxaline-3,4,9,10-perylene tetracarboxylic acid diacidamide (PV). The resultant nanocomposites have been characterized by transmission electron microscope (TEM), UV-vis absorption, photoluminescence (PL) and photocurrent spectra. Long range ordering can be observed in the form of PV-MWNT via π-stacking by TEM. Red-shift in the optical spectra consisting of the UV-vis absorption and PL spectra with the attraction of PV on the surface of the MWNTs were observed. The evident quenching in PL spectra of PV-MWNT was ascribed to the absorption and transfer of recombination energy by MWNT. Photosensitivity spectra demonstrated an increasing photocurrent in the ultraviolet region and a broadening photosensitivity in the red spectral region for solar cells based on PV-MWNT.     

Determination of tetrachloroethylene—Results of a collaborative study and the standardized method

The development, by collaborative study, of a standardized method for the determination of tetrachloroethylene in olive oils is described. The results of the study, which was carried out in 1989 under the direction of the International Olive Oil Council (IOOC), are presented and show that tetrachloroethylene can be readily determined, to an acceptable degree of precision, by gas-liquid chromatography with electron capture detection. A limited number of results obtained for the determination of trichloroethylene and chloroform by the same method indicate that a similar precision could be obtained with the method when determining these solvents also.     

氧化还原反应式配平中可能差错的几种情况

本文通过许多实例，指出了氧化还原反应式配平中可能出现的得失电子数不等或电荷数未配平、得失电子关系不对及反应式中酸碱性介质有错误等几种差错，并归纳了在酸碱性水溶液中平衡介质的方法。     

On the role of conserved proline residues in the structure and function of Clostridium pasteurianum 2[4Fe-4S] ferredoxin

The widespread occurrence of Pro residues adjacent to Cys ligandsin the sequences of [4Fe-4S] electron transfer proteins hasnot yet found a functional basis. The two such Pro of Clostridiumpasteurianum 2[4Fe-4S] ferredoxin have been probed by site-directedmutagenesis. Any one of them, but not both simultaneously, canbe substituted without impairing the proper folding of the protein.The reduction potentials of the ferredoxin variants fall ina narrow range of <20 mV above the potential of the nativeprotein. The biological activities with C.pasteurianum hydrogenaseand pyruvate-ferredoxin oxidoreductase do not change significantly,except when Lys replaces Pro. In these cases, the data suggestthat the two clusters of 2[4Fe-4S] ferredoxin may not alwaysbe equivalent in the interaction with the redox partners. Destabilizationof the structure has been observed as the consequence of theProl9 or Pro48 substitutions. Using 2-D NMR, this effect hasbeen associated with perturbations of both the hydrogen bondnetwork and one amino acid side chain around the [4Fe-4S] clusters.Thus, the conserved Pro found in the binding motif of [4Fe-4S]clusters in proteins strongly stabilizes the active site butdoes not play an essential role in the mechanism of electrontransfer.     

共轭聚合物／C60复合体系及其在光伏打电池中的应用

共轭聚合物／C60复合体系在有机太阳能电池中的应用引起了化学工作者的广泛兴趣。本文介绍了共轭聚合物／C60复合体系的光诱导电子转移，以及近年来该体系在光伏打电池中的研究进展。